Loosen and firm in one pass
Spring-tine working section plus Crosskill roller leaves soil loosened then firmly pressed — good for even emergence.
8 photos
Multifunctional cultivatorsNew
Namysło
Milan
Compact heavy cultivator with Crosskill roller
Compact Namysło cultivator (under 5 m long) with 2–3 rows of spring tines, front rollers and a rear Crosskill — loosening and firming in one pass.
Variants: Milan 300 · Milan 400 · Milan 450 · Milan 500 · Milan 600
- 2 or 3 tine rows
- Crosskill roller
- Parallel depth control
- Length under 5 m
- Side screen as standard
Parallel depth adjustment
Change depth with a pin; the machine stays parallel to the ground across the full width.
Easy on headlands
Overall length under 5 m helps with tight turns and a quick-reacting implement.
Standard equipment
- Flat-bar or tube rollers Ø 400 mm, 10 bars
- 3 rows of 45×12 tines + 200 mm duckfoot
- Hydraulic working-depth adjustment
- Maintenance-free ductile-iron shaft bearing, 5× sealed
- Levelling bar
- Rear Crosskill roller
- Hydraulically adjustable working section
- Powder-coated finish
- 36-month warranty
Optional equipment
- Independent levelling
- Track loosener
- Track loosener with duckfoot
- Light transport bogie (10/75 R15.3)
- Heavy transport bogie (400/60 R15.5)
- LED Dynamic lighting
- Mudguards
- Hydraulically braked axle
- Pneumatically braked axle
- 2 rows of double-coil tines with 250 mm duckfoot
- Extra levelling bar
- Tined harrow ahead of the roller
- Corrugated flat bar instead of straight
- Tandem Crosskill roller Ø 400 mm
Technical data
| Milan 300 | Milan 400 | Milan 450 | Milan 500 | Milan 600 | |
|---|---|---|---|---|---|
| Power requirement (HP) | 100-120 | 130-160 | 140-170 | 160-200 | 200 |
| Weight (kg) | 1580 | 2500 | 2800 | 3100 | 3900 |
| Working width (m) | 3,0m | 4,0m | 4,5m | 5,0m | 6,0m |
| Transport width (m) | 2,99m | 2,25m | 2,25m | 2,25m | 2,25m |
| Transport height (m) | 1,35m | 2,06m | 2,30m | 2,55m | 3,07m |
| Transport length (m) | 2,9m | 5,5m | 5,5m | 5,5m | 5,5m |
| Independent levelling (optional) | Not available | Yes | Yes | Yes | Yes |
| Frame height | 50cm | 50cm | 50cm | 50cm | 50cm |
| Tine spacing (3 rows) | 20cm | 20cm | 20cm | 20cm | 20cm |
| Tine spacing (2 rows) | 25cm | 25cm | 25cm | 25cm | 25cm |
| Tine types (optional) | 25×25 double-coil or straight 45×12 with duckfoot | 25×25 double-coil or straight 45×12 with duckfoot | 25×25 double-coil or straight 45×12 with duckfoot | 25×25 double-coil or straight 45×12 with duckfoot | 25×25 double-coil or straight 45×12 with duckfoot |
| Number of tines (3 rows) | 15 | 20 | 23 | 25 | 30 |
| Number of tines (2 rows) | 12 | 16 | 18 | 20 | 24 |
| Maintenance-free shaft bearings | Optional, extra cost | Optional, extra cost | Optional, extra cost | Optional, extra cost | Optional, extra cost |
| Working depth | 3-15cm | 3-15cm | 3-15cm | 3-15cm | 3-15cm |
| Track loosener | Optional, extra cost | Optional, extra cost | Optional, extra cost | Optional, extra cost | Optional, extra cost |
| Levelling harrow | Optional, extra cost | Optional, extra cost | Optional, extra cost | Optional, extra cost | Optional, extra cost |
| Harrow down-pressure | Manual with wrench / spring pressure | Manual with wrench / spring pressure | Manual with wrench / spring pressure | Manual with wrench / spring pressure | Manual with wrench / spring pressure |
| Working-depth adjustment | Hydraulic | Hydraulic | Hydraulic | Hydraulic | Hydraulic |
| Hydraulic folding | Not available | Cylinder with locks or mechanical lock | Cylinder with locks or mechanical lock | Cylinder with locks or mechanical lock | Cylinder with locks or mechanical lock |
| LED Dynamic lighting | Optional, extra cost | Optional, extra cost | Optional, extra cost | Optional, extra cost | Optional, extra cost |
| Hitch | Cat. 2/3 | Cat. 3N | Cat. 3N | Cat. 3N | Cat. 3N |
| Hitch pins | Included | Included | Included | Included | Included |
Need a price or setup?
Request a quote for Milan — we'll match the setup and send pricing.